The Winkler Target Stand
for WhiteTail Bales
Using one single 4 x 8 sheet of Plywood
TeamWinker target stand is a success! First prototype built! Recommend not using particle board. Feel free to use this design and spread it around. 1 piece plywood (4'x8'), 1 door hinge (plus screws),1-2 pieces of rope 36" long. Seen here at regulation FITA height. Allows for nearly 100% pass through without hitting the target stand. Folds flat for easy transport and storage. Approx cost $34 (using real plywood)
 |
 |
 |
 |
| Click for PRINTABLE: WinkerDiagram |
 |