BowstringJIG | Hinge Mounted | |
Return to HOME Return to Jig Instructions |
Click on image to return to thumbnails page | Copyright
2001,AA All Rights Reserved |
Note that the hinge is slightly larger(taller) than the channel. Be sure that you align the bottom of the hinge pin with the plane of the bottom of the channel. If you do not, then the whole jig will LEAN to one side. If you make this mistake you can mount a number of small silicone bumpers or cork bumpers on the bottom of the channel to raise it slightly. This has the added benefit of helping prevent scratching/damaging the dining room table!